云南镇源难处理金精矿工艺矿物学研究

利用X射线衍射、X射线荧光光谱（XRF）、X射线能谱分析（EDX）和矿物解离分析（MLA）等检测手段对云南镇源难处理金精矿的化学组成、矿物组成、硫化物特征以及金的分布情况进行了详细的工艺矿物学研究。结果显示：该金矿以硫化矿、碳酸盐和硅酸盐类矿物为主，含有3.18%的有机碳和2.37%的无机碳。通过金的诊断浸出发现96.16%的金被硫化物包裹，少量金以单体形式存在。通过对主要载金矿物黄铁矿、辉锑矿和毒砂的粒度、包裹及裸露情况进行分析，得出大部分硫化矿以解离单体的形式存在，少部分与其他矿物共生。根据MLA测试及金的诊断浸出，认为大部分金被硫化矿完全包裹，处理该矿石时应先进行硫化物包裹层的氧化处理，再进行金矿的浸出。     

固体自拉曼激光器多波长输出研究

实验对比了a切和c切的Nd∶YVO4晶体作为激光晶体时,激光器输出光光谱及输出功率上的区别。设计了一种小型化固体自拉曼多波长激光器,实验证明通过调节倍频晶体BBO的角度,可实现多波长选择性输出及同时输出,并测量了其输出光谱及单波长输出时的功率。     

Advances in statistical mechanics of rock masses and its engineering applications

To efficiently link the continuum mechanics for rocks with the structural statistics of rock masses,a theoretical and methodological system called the statistical mechanics of rock masses(SMRM)was developed in the past three decades.In SMRM,equivalent continuum models of stressestrain relationship,strength and failure probability for jointed rock masses were established,which were based on the geometric probability models characterising the rock mass structure.This follows the statistical physics,the continuum mechanics,the fracture mechanics and the weakest link hypothesis.A general constitutive model and complete stressestrain models under compressive and shear conditions were also developed as the derivatives of the SMRM theory.An SMRM calculation system was then developed to provide fast and precise solutions for parameter estimations of rock masses,such as full-direction rock quality designation(RQD),elastic modulus,Coulomb compressive strength,rock mass quality rating,and Poisson’s ratio and shear strength.The constitutive equations involved in SMRM were integrated into a FLAC3D based numerical module to apply for engineering rock masses.It is also capable of analysing the complete deformation of rock masses and active reinforcement of engineering rock masses.Examples of engineering applications of SMRM were presented,including a rock mass at QBT hydropower station in northwestern China,a dam slope of Zongo II hydropower station in D.R.Congo,an open-pit mine in Dexing,China,an underground powerhouse of Jinping I hydropower station in southwestern China,and a typical circular tunnel in Lanzhou-Chongqing railway,China.These applications verified the reliability of the SMRM and demonstrated its applicability to broad engineering issues associated with jointed rock masses.     

Fuzzy approximation-based adaptive control of nonstrict feedback stochastic nonlinear systems with time-varying state constraints

This article develops an approximation-based fuzzy control scheme for nonstrict feedback stochastic nonlinear systems (NFSNS) with time-varying state constraints. The difficulty in constructing controller is how to conquer the algebraic loop problem caused by nonstrict feedback structure, as well as prevent the state constraints from violating. To dispose the time-varying state constraints, time-varying barrier Lyapunov function is incorporated into the backstepping design framework. The lumped uncertainties of NFSNS are approximated by the fuzzy logic systems. By virtue of fuzzy basis function, the algebraic loop problem is effectively handled. Theoretical analysis shows that the predefined state constraints are not violated and all signals of the closed-loop systems are bounded. Finally, simulation results substantiate the validity of the devised method.     

Improved magnetic and electromagnetic absorption properties of xSrFe12O19/(1−x)NiFe2O4 composites

xSrFe₁₂O₁₉/(1−x)NiFe₂O₄ composites (0 ≤ x ≤ 1.0) were synthesized by using a conventional solid-state synthetic route. The results show that magnetic hysteresis loops of the xSrFe₁₂O₁₉/(1−x)NiFe₂O₄ composites are similar to those of individual component ferrites, except for the 0.1SrFe₁₂O₁₉/0.9NiFe₂O₄ and 0.3SrFe₁₂O₁₉/0.7NiFe₂O₄, suggesting that the hard/soft magnetic phases are well exchange-coupled. The saturation magnetization, coercivity, and remanent magnetization of the xSrFe₁₂O₁₉/(1−x)NiFe₂O₄ composites are increased with increasing content of SrFe₁₂O₁₉, with maximal values of 42.1 Am² kg⁻¹, 78.7 kA m⁻¹, 17.2 Am² kg⁻¹, respectively, as the content x is about 0.5. They are higher than those of the individual components, implying that interface coupling is present in the magnetic composites. The coercivity and remanent magnetization of the composites are increased initially with increasing sintering temperature and then show a downward tendency. For the component SrFe₁₂O₁₉ and NiFe₂O₄, the minimum reflection losses are −12.5 dB and −18.3 dB at match thicknesses of 2.5 mm and 2 mm, respectively. Compared with those of the component SrFe₁₂O₁₉ and NiFe₂O₄, the microwave absorption performances of the xSrFe₁₂O₁₉/(1−x)NiFe₂O₄ composites are improved remarkably, especially for the samples of x = 0.3 and x = 0.9. The minimum reflection losses values of the 0.3SrFe₁₂O₁₉/0.7NiFe₂O₄ composite are −31.6 dB (12.7 GHz) and −20.2 dB (13 GHz), while those of the 0.9SrFe₁₂O₁₉/0.1NiFe₂O₄ composites are −23.7 dB (16.3 GHz) and −33.5 dB (15.8 GHz), as the matching thicknesses are 2.5 mm and 2 mm, respectively. Therefore, the xSrFe₁₂O₁₉/(1−x)NiFe₂O₄ composites could be used as potential microwave absorption materials.     

Controlled Secure Direct Communication Protocol via the Three-Qubit Partially Entangled Set of States

In this paper, we first re-examine the previous protocol of controlled quantum secure direct communication of Zhang et al.’s scheme, which was found insecure under two kinds of attacks, fake entangled particles attack and disentanglement attack. Then, by changing the party of the preparation of cluster states and using unitary operations, we present an improved protocol which can avoid these two kinds of attacks. Moreover, the protocol is proposed using the three-qubit partially entangled set of states. It is more efficient by only using three particles rather than four or even more to transmit one bit secret information. Given our using state is much easier to prepare for multiqubit states and our protocol needs less measurement resource, it makes this protocol more convenient from an applied point of view.     

Electric transport properties of rare earth doped YbxCa1-xMnO3 ceramics (part I: Optimization of ceramic processing)

A comprehensive study was performed in order to find the effect of different calcination and sintering conditions on the physical properties of calcium manganite ceramics in dependence of temperature T and partial pressure of oxygen p(O₂). The eventual formation of oxygen vacancies during sintering was investigated and the results were confirmed by monitoring the release of oxygen using a ZrO₂ oxygen sensor. The phase transition behavior was studied using thermogravimetric analysis (TGA) in a wide range of p(O₂) ≈ 10^?1 MPa down to 10^-19 MPa at high temperatures accompanied by dilatometry- and XRD-measurements. Furthermore, the present study reveals for the first time a way for reducing and preventing crack formation that may occur during sintering. The present systematic research provides essential fundamental information before performing electrical measurements necessary in order to understand important factors about charge carriers and electrical transport mechanism.     

An enhanced state estimation for linear parabolic PDE systems with mobile sensors

This paper studies an enhanced state estimation problem of distributed parameter processes modeled by a linear parabolic partial differential equation using mobile sensors. The proposed estimation scheme contains a state estimator and the guidance of mobile sensors, where the spatial domain is decomposed into multiple subdomains according to the number of sensors and each sensor is capable of moving within the respective subdomain. The state estimator is desired to make the state estimation error system exponentially stable while providing an performance bound. The mobile sensor guidance is used to enhance the transient performance of the error system. By the Lyapunov direct technique, an integrated design of state estimator and mobile sensor guidance laws is developed in the form of bilinear matrix inequalities (BMIs) to meet the desired design objectives. Moreover, to make the performance bound as small as possible, a suboptimal enhanced state estimation problem is formulated as a BMI optimization one, which can be solved via an iterative linear matrix inequality algorithm. Finally, numerical simulations are given to show the effectiveness of the proposed method.     

基于NB分类器重访概率预测的Web缓存替换策略

Web缓存是用来解决网络访问延迟和网络拥塞问题，缓存替换策略直接影响缓存的命中率。为此，提出一种朴素贝叶斯（NB）分类器重访概率预测的Web缓存替换策略；根据用户之前访问日志，通过分区操作提取多项特征来表示每次访问的对象，并构建特征数据集；训练NB分类器，用来确定缓存中对象被再次访问的概率，为对象分配权重；结合LRU策略来合理删除一些对象。仿真结果表明，提出的策略在保证较高命中率的同时有效降低了执行时间。     

Theoretical kinetic study of the reaction between dimethyl disulfide and OH radicals

The potential energy profile of the reaction between dimethyl disulfide and OH^? radicals is explored by utilizing ab initio and hybrid meta density functional theory methods. Having the energies and structural data of the stationary points, statistical rate theories, such as transition state theory and variable reaction coordinate-transition state theory, are employed to compute the overall rate constants, and discuss the mechanism and product channels. On the basis of the calculations, the overall rate coefficient is predicted to be 2.49?×?10^?10?cm³?molecule^?1?s^?1 at 298?K. It is found that in the most favorable pathway, the reaction proceeds via formation of the relatively unstable intermediate CH₃S^?(OH)SCH₃ decomposing rapidly to yield CH₃S^?+CH₃SOH.